You are here

Hot news

Published on: 07/17/2017 - 17:52

Kloé, exhibitor at Microfluidics Congress in Philiadelphia Convention Center, from 25th to 26th of July 2017.

Published on: 05/25/2017 - 15:20

Kloé, exhibitor at Flow 17 at JUssieu University in Paris from 03rd to 05th of June 2017.
Kloé is particularly pleased and proud to announce the introduction of its new equipment Dilase 3D a very high resolution 3D printer dedicated to 3D microfluidics and biomedical applications.

Published on: 05/01/2017 - 14:07

Kloé, exhibitor ans sponsor, at the 9th annual Lab on a Chip and Microfluidics organised by Selectbio in Munich the 10th and 11th May 2017.

Published on: 11/21/2016 - 17:42

Kloé sponsors the 27th Colloque IFSBM "Applications Biomédicales des Technologies Microfluidiques" which takes place at the Medecine Faculty Kremlin-Bicêtre in Paris on November, the 21st 2016

Published on: 10/03/2016 - 17:30

KLOE SA will be at MicroTAS 2016 conference from 9 to 13 October 2016 in Dublin, Ireland, 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences.

Sponsor and exhibitor of this international conference; one of the most prominent in the field of microfluidics, KLOE will be happy to welcome you at its booth # 36.

www.microtas2016.org

Published on: 09/29/2016 - 13:27

Between September 14th to 16th, 2016 Kloé had the pleasure to welcome its distributors from all around the world to its facilities in Montpellier for a working seminar and discovery of our region.

Published on: 03/18/2015 - 17:10

Kloé will be exhibiting at Laser World Of Photonics from 22th to 25th of June 2015.

Our team will be happy to welcome you on UBIFRANCE lodge at booth B2-261 to present all the photolithography equipments range DILASE, UV-KUB and K-ILU.

www.world-of-photonics.com

Published on: 09/17/2014 - 11:14

Kloé will be exhibiting at OPTO Paris from 16th to 18th of September 2014.
Its recent technological advancements in terms of high aspect ratio by photolithography will be presented.

Published on: 09/15/2014 - 12:09

Kloé presents UV KUB 9, a new equipment at the Micromachine exhibition which takes place in Tokyo from 03rd to 05th of july 2013. The UV KUB 9 and other Dilase equipment are presented on the booth of its Japanese commercial partner Beams. UV KUB 9 is an equipment dedicated to dicing blue tape curing used in microelectronics industry.

Published on: 09/15/2014 - 12:09

Kloé compagny will be happy to welcome you on its booth at OPTO, Paris Expo, Porte de Versailles in Paris, from 23 to 25 October 2012, Hall 1, Stand K42. It will present you its Dilase laser lithography equipments and its UV-KUB insolator-masker .